Automation Gateway Assemblies; Swirl Control Dgm - Graco PrecisionSwirl Instructions-Parts List Manual

Automation Gateway Assemblies

Each control center comes with one automation gateway assem-
bly. The automation gateway module is either a Discrete Gate-
way Module (DGM) or one of the Communications Gateway
Modules (CGM).To order a replacement, see the following table.
You will also need to order software upgrade token (16K743).
NOTE: Base and cable are not included.
User
PCF Interface
Model Description
PFxx0x Discrete
(DGM)
PFxx1x
™
DeviceNet
+
(CGM)
PFxx6x
PFxx2x
™
EtherNet/IP
+
(CGM)
PFxx7x
PFxx3x
™
PROFIBUS
(CGM)
PFxx4x
™
PROFINET
(CGM)

Swirl Control DGM

The assemblies below each contain one swirl control DGM used
to control one Swirl Dispenser. To order a replacement, see the
following table. You will also need to order software upgrade
token (16K743).
Part Number
Assembly To Order
PFxxx2,
PFxxx3,
24B681
16M350,
16M351
3A2098S
Gateway
Part
Number Rotary
To Switch
Order Position
24B681 0
15V759 Any
15V760 Any
15V761 Any
15V762 Any
Rotary Switch
Position
1, 2, 3, or 4;
see Swirl Control
DGM on page 22
Compatible
with
Advanced
CGM Map
No
Yes
Yes
No
No
Swirl Control DGM
Models
Automation Gateway
(DGM or CGM)
9