Expansion Swirl Enclosure Assemblies; Precisionswirl Orbital Dispenser Assemblies - Graco PrecisionSwirl Instructions-Parts List Manual

Models

Expansion Swirl Enclosure Assemblies

The following enclosures are ETL approved. Assemblies PFxxx2, and PFxxx3 are setup for one PrecisionSwirl Orbital
Dispenser. If you wish to have additional swirl dispensers, order one expansion PrecisionSwirl assembly below for each.
Systems with a DGM as the automation gateway can have up to two swirl dispensers total. Systems with a CGM as the
automation gateway can have up to four swirl dispensers total.
Part
16M350
16M351

PrecisionSwirl Orbital Dispenser Assemblies

See manual 309403.
Version Part, Series
Standard 243402, B
Standard 243403, B
Compact 289262, A
Compact 289261, A
PrecisionSwirl Orbital Dispenser Cable
Assemblies
Part
233125 6 ft (1.8 m) motor extension cable assembly
233124 9 ft (2.7 m) motor extension cable assembly
233123 15 ft (4.6 m) motor extension cable assembly
617870 55 ft (16.8 m) motor extension cable assembly
8
Description
100 - 240 Vac
24 Vdc
Coupler Offset
0.012 in. for narrow bead
widths
0.028 in. for wide bead
widths
0.012 in. for narrow bead
widths
0.018 in. for medium bead
widths
Description
Typical Application
Hem flange and after hem
Seam sealing
Hem flange and after hem
Seam sealing
Maximum
Working
Pressure
3500 psi
(24.1 MPa,
241 bar)
3A2098S