Graco PrecisionSwirl Instructions-Parts List Manual page 22

Overview
Swirl Control DGM
One swirl control DGM is included in the integrated Swirl
control center, and in each expansion swirl enclosure.
Each Swirl control DGM controls one swirl orbiter.
Each swirl control DGM must have a unique rotary
switch position. The rotary switch position determines
the number assigned to the swirl dispenser attached to
that DGM. If the rotary switch position must be changed,
do so with the power off.
Each integrated swirl control center and swirl enclosure
comes with a pre-installed cable between the swirl con-
trol DGM and the swirl board. The customer does not
need to make any external connections with the swirl
control DGM.
Front
CD
CA
CB
CE
F . 10: Swirl Control DGM
IG
22
DGM Function
Swirl Control 1
Swirl Control 2
Swirl Control 3
Swirl Control 4
Back
CF
CH
Rotary Switch
Position
1
2
3
4
Front
(Access Cover Removed)
Rotary Software
Switch Token Slot
3A2098S