Installation
Mount Coriolis Flow Meter
NOTE: A Coriolis flow meter only comes with PFxCxx
assemblies.
See Fluid Plate Assembly Technical Data on page
149 for the weight of your meter. The meter is heavy
and must be properly supported to avoid stress on the
fluid connections.
Fluid Flow Upward
Mounting so fluid flow is upward through the meter is
preferred as this allows solids to settle out and air to rise
away from metering tube. See F
F
. 16. Fluid Flow Upward
IG
28
NOTICE
. 16.
IG
check valve
Horizontal Installation
The horizontal installation is the recommended installa-
tion.
If the medium might contain solid particles, mount the
meter as shown in position A, in all other cases as
shown in position B.
F
. 17.
IG
3A2098S