Westermo RedFox Series Management Manual page 1103

For example, use "node 1 consist-net 1,2" to specify that ETBN 1 is con-
nected to ECNs 1 and 2.
"no node <LOCAL _ ETBN _ ID>" removes the settings for given node.
Use "show node" to view the current list of ETBNs to consist network con-
nections.
Default values Not applicable
43.2.9 Local ID
Syntax [no] local-id <LOCAL _ ETBN _ ID>
Context
TTDP Configuration
Usage Set local ID to indicate the position (LOCAL_ETBN_ID) of this ETBN within
the consist.
"no local-id" resets local-id to default setting (ID 1).
Use "show local-id" to view the current local ID setting.
Default values 1
43.2.10 Default 61375-2-5 multicast routes
Syntax [no] default-mroutes
Context
TTDP Configuration
Usage Configure standardised IEC 61375-2-5 multicast routes.
Sets up the train-scope multicast routes defined in IEC61375-2-5 section 6.4.4.
"no default-mroutes" disables the default routes.
Use "show default-mroutes" to view the current setting.
Default values Disabled
43.2.11 TTDP Multicast routes
Syntax [no] mroute group <MCADDR> out <NET _ ID _ LIST>
© 2018 Westermo Teleindustri AB
Westermo OS Management Guide
context
context
Version 4.24.1-0
1103