Westermo RedFox Series Management Manual page 1042

Context
Global Configuration
Usage Enter/create the AT Command Profile Configuration context of the given
AT Profile instance ID. If this is a new instance, the instance will be created
first upon leaving the AT Command profile context with end or leave.
Use "no atcmd <ID>" to remove an existing AT Command profile instance,
or "no atcmd" to remove all profiles.
Use "show atcmd" to show a list of current profiles, or "show atcmd [ID]"
to show detailed settings for a specific profile (also available as "show" com-
mand within the AT Command Profile Configuration context).
Default values 1 (i.e., running "atcmd" will enter/create AT command set 1.
However, running "no atcmd" will remove all configured AT command sets.)
40.3.18 Auto-Answer
Syntax [no] auto-answer <COUNT>
Context
AT Command Profile Configuration
Usage Set auto-answer, answer after number of rings. Use command "auto-answer
0" for no auto-answer.
Use command "no auto-answer" to reset to the default setting.
Use "show auto-answer" to show the current setting.
Default values 1
40.3.19 Echo
Syntax [no] echo
Context
AT Command Profile Configuration
Usage Enables/disables echo (ATE overrides this)
Use "show echo" to show the current setting.
Default values Enabled
1042
Westermo OS Management Guide
context
context
context
© 2018 Westermo Teleindustri AB
Version 4.24.1-0