Westermo RedFox Series Management Manual page 1044

Usage Configure the OK message, verbose mode text and numeric code. Omit-
ting the code will use the default value. If verbose (above) is disabled the
numeric code is displayed.
Use "show ok-message" to show the current setting.
Default values Text: OK, Code: 10
40.3.24 Error-Message
Syntax [no] error-message text <MESSAGE> [code <CODE>]
Context
AT Command Profile Configuration
Usage Configure the Error message, verbose mode text and numeric code. Omit-
ting the code will use the default value. If verbose (above) is disabled the
numeric code is displayed.
Use "show error-message" to show the current setting.
Default values Text: ERROR, Code: 4
40.3.25 Connect-Message
Syntax [no] connect-message text <MESSAGE> [code <CODE>]
Context
AT Command Profile Configuration
Usage Configure the Connect message, verbose mode text and numeric code.
Omitting the code will use the default value. If verbose (above) is disabled
the numeric code is displayed.
Use "show connect-message" to show the current setting.
Default values Text: CONNECT, Code: 1
40.3.26 Disconnect-Message
Syntax [no] disconnect-message text <MESSAGE> [code <CODE>]
Context
AT Command Profile Configuration
1044
Westermo OS Management Guide
context
context
context
© 2018 Westermo Teleindustri AB
Version 4.24.1-0