Westermo RedFox Series Management Manual page 1000

There is no automated way of removing WeConnect, it has to be done manually.
Easiest way is to do a factory reset on your unit, but sometimes that is not an
option.
Restoring an old configuration that was saved before you installed WeConnect is
one way. But this procedure will not remove the WeConnect certificates and keys.
You need to manually remove these.
If you need to manually remove WeConnect but keep all other configuration as it
is, you should do these steps:
ˆ Delete the SSL VPN tunnel with ID 253.
ˆ Delete RIP configuration.
ˆ Delete WeConnect related certificates and keys.
ˆ If you have the firewall enabled, you may need to remove firewall forward
filter rules that are related to interface ssl253.
1000
Westermo OS Management Guide
© 2018 Westermo Teleindustri AB
Version 4.24.1-0