Table of Contents
Advertisement
Context
Global Configuration
Usage Enter or delete the TTDP Configuration context. Use command "ttdp" to
enter the context. If the
entering it will create the context with default settings.
Use "no ttdp" to remove the TTDP context and all its settings.
Use "show ttdp" to show all TTDP settings (also available as "show" com-
mand within the TTDP Configuration context).
Default values Disabled
43.2.2 Enable TTDP
Syntax enable
Context
TTDP Configuration
Usage Activates and deactivates TTDP.
Use "enable" to activate TTDP. "no enable" disables TTDP, without remov-
ing the configured TTDP settings.
Use "show enable" to view the current enable setting.
Default values Enabled
43.2.3 Direction 1 Aggregate
Syntax dir1 <AGG1>
Context
TTDP Configuration
Usage Set which aggregate that is connected in direction 1 (consist reference
direction). Configuring the "dir1" aggregate is required for TTDP to be
activated.
"no dir1" resets direction 1 to the default setting (disabled).
Use "show dir1" to view the current aggregate configured for direction 1.
Default values Disabled
1100
Westermo OS Management Guide
context
TTDP Configuration
context
context
© 2018 Westermo Teleindustri AB
Version 4.24.1-0
context does not already exist,
Advertisement
Table of Contents
