Westermo RedFox Series Management Manual page 1050

Exceptions
Modbus Server specific settings
Listen interface
Poll Interval
Inactivity Timeout
Broadcast Delay
Redirect
Redirect Broadcast
Request Queue
Configuration of Modbus Gateway in Client Mode
Modbus Client specific settings
Map table
1050
Configures Modbus Exceptions. With Modbus Excep-
tions enabled, the Modbus Gateway will react upon and
respond to certain error conditions, e.g., if a Gateway
in client mode receives a (serial) Modbus message ad-
dressed to Modbus unit not found in its Map table. If
exception handling is desired, except for this particu-
lar situation, the gateway can be configured to ignore
exceptions for unknown units.
Configures the listen Interface and port.
Configures the Poll Interval
Configures the Inactivity timer
Configures the Broadcast delay
Configures the Modbus Address redirection
Enables/Disables redirect of Modbus broadcasts
Enables/Disables the Request Queue
Configures the mapping of Modbus unit number to IP
address and TCP port number of Modbus/TCP slaves.
Westermo OS Management Guide
Continued from previous page
© 2018 Westermo Teleindustri AB
Version 4.24.1-0