Westermo RedFox Series Management Manual page 1073

Default values Disabled (0)
42.3.6 Setting grant-delay
Syntax [no] grant-delay <MILLISECONDS>
Context
Microlok Gateway Configuration
Usage Set Grant signal delay in milliseconds, e.g. "grant-delay 100". Allowed
range is <1-1000> (milliseconds). Use "no grant-delay" or "grant-delay
0" to disable this function.
Use "show grant-delay" to list the current Grant signal delay setting.
Default values Disabled (0)
42.3.7 Managing Mapping of MicroLok units to IP hosts
Syntax [no] map station [dec] <MICROLOK-ADDR> <serial <SERIALPORT> |
remote <IPADDRESS[:UDPPORT]>> [session-timeout <ms>] [description
<STRING>]
Context
Microlok Gateway Configuration
Usage Configure the MicroLok address lookup table entries. Up to 64 MicroLok
station entries can be added.
ˆ MicroLok addresses: MicroLok addresses are given in hexadecimal
form (range: 0-ffff), e.g., "map station ff serial 1" or "map station
0xff serial 1". Add the keyword "dec" to interpret an address as
decimal, e.g., "map station dec 30 serial 1" is equivalent to "map
station 1e serial 1".
ˆ Local or Remote Station: An address entry is only active if a (local)
serial port or a (remote) gateway IP address is set:
– For local MicroLok addresses the serial port is set, e.g., "map station
10 serial 1"
– For remote MicroLok addresses the remote gateway IP address (and
optionally the UDP port) is set, e.g., "map station 20 remote
192.168.3.1:34567". Default UDP port is 60000.
© 2018 Westermo Teleindustri AB
Westermo OS Management Guide
context
context
Version 4.24.1-0
1073