Westermo RedFox Series Management Manual page 1058

41.2.14 Setting Redirect
Syntax [no] redirect <MODBUS-ADDR>
Context
Modbus Gateway Configuration
Usage Set redirect, i.e., redirect all Modbus addresses to this address. Allowed
values are in range <1-255> (seconds)
Use "no redirect" to disable the redirect setting.
Use "show redirect" to show the current redirect setting.
Only applicable when configuring the Modbus Gateway in "server" mode
(see section
Default values Disabled
41.2.15 Setting Redirect Broadcast
Syntax [no] redirect-broadcast (server mode only)
Context Modbus Gateway Configuration
Usage Set redirect broadcast, i.e., redirect all Modbus broadcasts to Modbus
address 1.
Use "no redirect-broadcast" to disable the redirect broadcast setting.
Use "show redirect-broadcast" to show the current redirect broadcast
setting.
Only applicable when configuring the Modbus Gateway in "server" mode
(see section
Default values Disabled
41.2.16 Setting Request Queue
Syntax [no] request-queue
Context
Modbus Gateway Configuration
1058
41.2.3).
41.2.3).
Westermo OS Management Guide
context (server mode only)
context
context (server mode only)
© 2018 Westermo Teleindustri AB
Version 4.24.1-0