Westermo RedFox Series Management Manual page 1057

Usage Set Inactivity Timeout, i.e., the time to keep an idle session open. Allowed
values are in range <10-65535> (seconds).
Use "no inactivity-timeout" to disable the inactivity timeout.
Use "show inactivity-timeout" to show the current timeout setting.
Only applicable when configuring the Modbus Gateway in "server" mode
(see section
Default values Disabled
41.2.12 Setting Response Timeout
Syntax [no] response-timeout <MILLISECONDS>
Context
Modbus Gateway Configuration
Usage Set Response Timeout. Allowed values are in range <1-65535> (millisec-
onds).
Use "no response-timeout" to reset the response timeout to default (500
milliseconds).
Use "show response-timeout" to show the current timeout setting.
Default values 500
41.2.13 Setting Broadcast Delay
Syntax [no] broadcast-delay <MILLISECONDS>
Context
Modbus Gateway Configuration
Usage Set Broadcast Delay, i.e., time to wait after transmitting an broadcast.
Allowed values are in range <0-65535> (milliseconds).
Use "no broadcast-delay" to reset the broadcast delay to default (100
milliseconds).
Use "show broadcast-delay" to show the current delay setting.
Only applicable when configuring the Modbus Gateway in "server" mode
(see section
Default values 100
© 2018 Westermo Teleindustri AB
41.2.3).
41.2.3).
Westermo OS Management Guide
context
context (server mode only)
Version 4.24.1-0
1057