Westermo RedFox Series Management Manual page 1071

Use "show microlok" (from
information for configured MicroLok gateway instances. Use "show" (within
the Microlok Gateway Configuration context) to list detailed information on
a specific MicroLok gateway instance.
Default values Not applicable.
Example
example:/config/#> show microlok
Microlok II Gateway
ID Enabled Serial
===============================================================================
1 Enabled 1
example:/config/#> microlok
example:/config/microlok-1/#> show
Microlok II gateway
Status
Listen
Key On Delay
Key Off Delay
Grant Delay
Address Lookup Table (ALT):
--------------------------------------------------------------------------------
Addr Remote Peer
0010 N/A
0020 192.168.3.3:60000
example:/config/microlok-1/#>
42.3.2 Setting Enable
Syntax [no] enable
Context
Microlok Gateway Configuration
Usage Use "enable" to enable and "no enable" to disable a MicroLok II gate-
way instance.
Use "show enable" to show whether this gateway instance is enabled or
disabled.
Default values Enabled
© 2018 Westermo Teleindustri AB
Global Configuration
Listen Port
60000
: Enabled
: ANY port 60000
: Disabled
: Disabled
: Disabled
Serial Description
1 siteA-ctrl3
N/A siteB-ctrl1
Westermo OS Management Guide
context) to list summary
Session Timeout (ms)
Disabled
Disabled
context
Version 4.24.1-0
1071