Westermo RedFox Series Management Manual page 1030

Destination/peer
40.2.4 AT Command Profiles overview
Menu path: Configuration
Click on the Edit icon (
1
The "dynamic peer" setting is referred to as "latest calling" in Westermo EDW-100.
1030
C, P IP address and (UDP/TCP) port for remote peer(s)/
destinations.
tion/peer entries can be configured, and the des-
tination address can be unicast, broadcast or mul-
ticast. Default port: 9000
Serial Serial Over IP
) to edit the settings of a specific profile.
Westermo OS Management Guide
Continued from previous page
In Peer Mode, several destina-
AT Command
© 2018 Westermo Teleindustri AB
Version 4.24.1-0