Westermo RedFox Series Management Manual page 1039

Context
Serial Over IP Configuration
Usage Set protocol extensions. This is only applicable in server mode
tion 40.3.2).
When accessing the serial port with Westermo's OEM version of Serial/IP
the protocol extension setting should be "protocol telnet".
Use "no protocol" (or "protocol raw") to disable protocol extensions.
Use "show protocol" to show the current setting.
Default values Disabled ("no protocol")
40.3.10 Setting secondary listen port
Syntax [no] listen-secondary port <PORT>
Context
Serial Over IP Configuration
Usage Additional local TCP port to listen to. Will listen on the same interface as
set in Listen option.Only applicable in TCP-Server mode.
Use "show listen-secondary" to show the current setting.
Default values Disabled ("no listen-secondary").
40.3.11 Setting secondary mode
Syntax [no] secondary-mode <failover|raw|slotted <TIMEOUT>>
Context Serial Over IP Configuration
Usage How to handle concurrent access to serial port. See
available modes.Only applicable in TCP-Server mode.
Use "show secondary-mode" to show the current setting.
Default values Slotted, timeout 600 ms ("no secondary-mode").
8
Serial/IP is a registered trademark of Tactical Software LLC.
© 2018 Westermo Teleindustri AB
Westermo OS Management Guide
context
context
context
Version 4.24.1-0
(sec-
®
8
Section 40.1.2 for
1039