Bridge Filtering - D-Link DSL-G225 User Manual

Section 4 - Configuration
Bridge Filtering only effects ATM PVCs configured for Bridge mode. ALLOW means that all
MAC layer frames will be ALLOWED except those matching with any of the specified rules
in the following table. DENY means that all MAC layer frames will be DENIED except those
matching with any of the specified rules in the following table.
Set the Bridge Filtering Global Policy to either ALLOW or DENY the following rules. Click
Apply after changing the setting.
The current active bridge filters will be listed here.
Click Add to add a new rule to the bridge filter list.
Enter the Bridge Filter rules.
Click Apply when you are done.
D-Link DSL-G225 Wireless N300 ADSL2+/VDSL2 Modem Router User Manual
BRIDGE FILTER SETUP
ADD BRIDGE FILTER

Bridge Filtering

65