Section 3 - Configuration
This page allows you to configure traffic bandwidth and rules for network traffic.
Total Bandwidth:
Enter the total bandwidth for uploading and
downloading.
Click to Apply to enable Traffic Control
QoS Rules
Click the Add button once to view the QoS Rules settings.
Source IP:
Enter the source IP.
Up Floor:
Enter the minimum upload speed.
Down Floor:
Enter the minimum download speed.
Up Ceiling:
Enter the maximum upload speed.
Down Ceiling:
Enter maximum download speed.
Click the Add button to save any changes made. The QoS rule will then be added to the QoS rules table. To delete an existing QoS rule, select it in
the QoS rules table and click the Delete button.
D-Link DIR-816 User Manual
Traffic Control
45