Port Mapping And Priority Setting - D-Link DSL-G624T User Manual

DSL-G624T Wireless ADSL Router User Guide

Port Mapping and Priority Setting

To set QoS for the router, first click the Port Mapping QoS check option in the middle of the window. This
will open the menu pictured below. Select the PVC (PVC0-PVC7) that will associate with the corresponding
port and choose a priority for this combination. If a single PVC (PVC0) is used for the ADSL account, this
menu can be used to set QoS priority settings for each Ethernet port.
An example where port mapping and priority can be used is an ADSL account with two PVCs (virtual
connections) where one PVC is dedicated to VoIP traffic. The highest priority, 1, is set for a single Ethernet
port that is mapped to the VoIP-dedicated PVC. The three remaining Ethernet ports and wireless traffic are
mapped to the other PVC and assigned a lower priority. It may also be useful to set a bandwidth limit for the
lower priority ports.
QoS Priority Configuration and Port Mapping menu
To set a maximum Bandwidth in kbps (Auto, 64 to 1024), use the drop-down menu Bandwidth menu for
each port. The Auto setting automatically chooses the most appropriate limit.
Click Apply to set the configuration.
71