Mitsubishi Electric MELSEC-Q Series User Manual page 92

3.
Add LJ51AW12AL to a project in GX Works2.
Project window  [Intelligent Function Module]  Right click  [New Module]
4.
Open the LJ51AW12AL switch setting window, and set the number of transmission points.
Project window  [Intelligent Function Module]  LJ51AW12AL  [Switch Setting]
5.
Write the set parameters to the head module, and reset the head module or power off and on the
programmable controller.
[Online]  [Write to PLC]
(4) Devices used by users
X1000
X1001
X1003
X1004
D500 to D515
D100 to D115
X100 to X1FF
Y100 to Y1FF
M0
M1
M10
M11
90
or Power OFF
Device
ON
Description
Module READY
DP/DN short error
Transmission cable voltage drop error
DP/DN disconnection error
Input information area
Output information area
Input data
Output data
Device for checking the master module status (for executing the MC
and MCR instructions)
Program starting contact
ZP.REMTO instruction completion device
ZP.REMTO instruction abnormal end device