Download  Print this page

Introduction; Compliance With Emc And Low Voltage Directives - Mitsubishi Electric MELSEC-Q Series User Manual

Melsec-q/l anywireaslink master module.
Hide thumbs


Thank you for purchasing the Mitsubishi MELSEC-Q or -L series programmable controllers.
This manual describes the functions and programming of the QJ51AW12AL AnyWireASLINK master module and
LJ51AW12AL AnyWireASLINK master module.
Before using this product, please read this manual and the relevant manuals carefully and develop familiarity with the
functions and performance of the MELSEC-Q or -L series programmable controller to handle the product correctly.
When applying the program examples introduced in this manual to an actual system, ensure the applicability and
confirm that it will not cause system control problems.
Please make sure that the end users read this manual.
Unless otherwise specified, this manual describes the program examples in which the I/O numbers of X/Y10 to X/Y2F are
assigned for a master module. I/O numbers must be assigned to apply the program examples introduced in this manual to
an actual system.
For I/O number assignment, refer to the following.
 User's Manual (Function Explanation, Program Fundamentals) for the CPU module used
(1) Method of ensuring compliance
To ensure that Mitsubishi programmable controllers maintain EMC and Low Voltage Directives when incorporated
into other machinery or equipment, certain measures may be necessary. Please refer to one of the following
• User's manual for the CPU module or head module used
• Safety Guidelines (This manual is included with the CPU module, base unit, or head module.)
The CE mark on the side of the programmable controller indicates compliance with EMC and Low Voltage
(2) Additional measures
To ensure that this product maintains EMC and Low Voltage Directives, please refer to Page 113, Appendix 4.




Table of Contents

   Related Manuals for Mitsubishi Electric MELSEC-Q Series

This manual is also suitable for:

Qj51aw12alMelsec-l seriesLj51aw12al

Comments to this Manuals

Symbols: 0
Latest comments: