Mitsubishi Electric MELSEC-Q Series User Manual page 91

5.
Write the set parameters into the CPU module of the master station, and reset the CPU module or
power off and on the programmable controller.
[Online]  [Write to PLC]
(b) Settings on the intelligent device station
1.
Create a project in GX Works2.
For "Series", select "LCPU". For "Type", select "LJ72GF15-T2".
[Project]  [New]
2.
Open the PLC parameter setting window, and make settings as below.
Project window  [Parameter]  [PLC Parameter]  "Communication Head Setting"
RESET
or Power OFF ON
CHAPTER 9 PROGRAMMING
89
9