Mitsubishi Electric MELSEC-Q Series User Manual page 83

2.
Add QJ51AW12AL to a project in GX Works2.
Project window  [Intelligent Function Module]  Right click  [New Module]
3.
Open the QJ51AW12AL switch setting window, and set the number of transmission points.
Project window  [Intelligent Function Module]  QJ51AW12AL  [Switch Setting]
4.
Write the set parameters into the remote I/O module, and reset the remote I/O module.
[Online]  [Write to PLC]
RESET
Press the switch
MODE
for a while.
CHAPTER 9 PROGRAMMING
81
9