Codan 8525B Series Handbook page 99

Step Action... Display shows...
2. Using the numeric
buttons, enter the
start frequency to
the nearest 100
Hz.
Press
3.
Enter
4. Enter the stop
frequency to the
nearest 100 Hz.
Press
5.
Enter
6. Press
2
Slow
or
1
Fast
Outback HF Radiophone
Using the receiver in scan mode
Remarks...
This is an example of
selecting a band scan to
start at 4000 kHz.
The decimal points are
automatically entered by
the Radiophone.
This is an example of
selecting a band scan to
stop at 5000 kHz.
S indicates the slow rate
of scan (100 Hz steps).
F indicates the fast rate
of scan (1 kHz steps).
F
6-13