Changing The Set-Up Options; Set-Up Option Links - Codan 8525B Series Handbook

11. Changing the set-up options

Some of the set-up options in this section can be completed by
the user, others must only be carried out by qualified personnel,
either at the Codan factory or by a Codan agent. A statement is
made in the procedure whenever qualified personnel are
required.
All displays in this section show examples of channel and
frequency numbers. You must insert your selected channel and
frequency numbers.

Set-up option links

Some of the set-up procedures may need a link to be moved
inside the control head, while some need a link soldered inside
the transceiver. The moveable link is called the control head link
(refer to figure 11.1), the soldered link is called the
microprocessor link (refer to figure 11.2).
Outback HF Radiophone
F
11-1