Selective Call Mute Enable Or Inhibit - Codan 8525B Series Handbook

Using selective call

Selective call mute enable or inhibit

This facility enables or inhibits the operation of the S'Call Mute button. When S'Call
Mute is inhibited you cannot operate selective call mute.
Step Action... Display shows...
1. Turn the No display.
Radiophone off
and move the
control head panel
link from position
E to position 1.
2. Hold down Hold the S'Call Mute
button down until the
S'Call
Mute
display shows
and press
On/Off
3. Press
S'Call
Mute
Press No display.
4.
On/Off
Step Action... Display shows...
5-10
Remarks...
Before moving the link,
note its original position.
Refer to section 11,
Changing the position of
the control head link.
Repeatedly pressing
S'Call Mute will switch
between ENAbLE and
inhib (inhibit).
Stop at the selection you
require.
The Radiophone is now
switched off.
F
Remarks...
Outback HF Radiophone