Programming Channels - Codan 8525B Series Handbook

7. Programming channels

Your Radiophone can store up to 600 channels. A maximum of
501 transmit and receive channels can be pre-programmed by
the factory or a Codan agent. The remaining 99 programmable
channels (P-channels) can be set by you from the front panel,
either by copying from an existing programmed transmit/receive
channel or adding a receive only frequency channel.
You cannot, however, change or program transmit frequencies
from the front panel.
Existing options can be modified, such as:
•
E–emergency call (RFDS)
•
S–selective call
•
t–calls (four 2-tone calls)
•
Upper Side Band mode (USB) or Lower Side Band mode.
The factory or agent programmed channels are stored in the
internal memory and can only be reprogrammed or deleted by
the factory or agent.
P-channels are stored in memory but can be reprogrammed or
deleted at any time by the operator.
All displays in this section show examples of channel and
frequency numbers. You must insert your selected channel and
frequency numbers.
Outback HF Radiophone 7-1