Ptt Timer - Codan 8525B Series Handbook

Changing the set-up options

PTT timer

This facility stops the Radiophone from being left on in the transmit state. If the
transmit time exceeds the PTT timer setting, the Radiophone reverts to the receive
mode and an error message is displayed.
The timer is set at the factory to 10 minutes. You may turn this facility off, or vary the
time, in five minute intervals, between 5 and 35 minutes.
Step Action... Display shows...
1. Turn the No display.
Radiophone off
and move the
control head link
from position E to
position 1.
2. Hold down Hold the Tune button
down until the display
Tune
shows
and press
On/Off
3. Press
1
Fast
or
Fast
6
11-8
Remarks...
Refer to the procedure on
page 11-3.
This turns the
Radiophone on, and into
the PTT timer set-up
mode.
The PTT time out time
can be changed from 5 to
35 minutes.
Press either the or
buttons to increase
or decrease the time.
Stop at the setting you
require.
F
Outback HF Radiophone