Setting Tone Calls - Codan 8525B Series Handbook

Using selective call
Press
10.
Enter

Setting tone calls

11. This procedure is
not required at
this time.
12. Press
On/Off
5-8
This sets the new beacon
setting and moves to the
next feature (tone
calling).
For more information on
tone calling, refer to
section 8, Using tone
call.
This procedure is
covered in detail in
section 8, Setting up tone
call.
This turns your
Radiophone off and
registers all the selective
call settings you have just
made.
q
Outback HF Radiophone