Using The Select Channel Button - Codan 8525B Series Handbook

Using the Radiophone

Using the select channel button

Step Action... Display shows...
1. Press
Select
Channel
2. If the channel was
installed by the
factory, press
2
Slow
If the channel was
installed by you,
(F or P channels)
press
O
P
and
9
3. Press
Enter
Note: F numbers
must
always be
selected as
P numbers.
4-10
Remarks...
This is an example of
how to recall channel 2.
For details on F and P
channels, refer to
sections 6 & 7
respectively.
This is an example of
how to recall channel P9.
The channel you selected
will be recalled (in this
case channel P9).
If you enter an incorrect
channel, the display
shows the message 'NOT
FOUND', and reverts to
the next lowest
programmed channel to
the one you selected.
q
Outback HF Radiophone