Codan 8525B Series Handbook page 97

Step Action... Display shows...
3. If the call is
addressed to the
Radiophone the
display changes.
Every time an
addressed call is
detected, the
display will repeat
the same message
with the
appropriate
channel
frequency.
To stop scanning
4.
press
Scan
Outback HF Radiophone
Using the receiver in scan mode
Remarks...
If the call is not answered
immediately, the
scanning stops for 2½
minutes and you will
hear 'pips' every 4
seconds.
After this period of time
the Radiophone carries
on scanning.
The button indicator will
go out.
q
6-11