Codan 8525B Series Handbook page 145

RFDS and Telstra services
Step Action... Display shows...
2. Press
OTC
S'Call
and then press
Select
Channel
until the required
selective call
address appears
against the Telstra
station selected.
3. Press The display returns to
normal.
OTC
S'Call
4. Use the
microphone to
carry out normal
voice
communication.
10-8
Remarks...
A table of all the Telstra
station selcall address
numbers is shown on
page 10-9.
The selective call signal
is transmitted.
If the call is successful,
the Telstra station will
automatically respond
with a series of short
tones. The station
operator will then
respond with normal
voice communication.
Refer to section 4, Using
the microphone.
F
Outback HF Radiophone