Codan 8525B Series Handbook page 136

Step Action... Display shows...
2. Press
Selective
Call
Press
3.
Enter
4. Check that the The display does not
channel is free change.
from traffic, then
press
Selective
Call
Outback HF Radiophone
Making a telephone interconnect call
Remarks...
The transceiver
automatically selects the
correct channel, and
displays the self
identification address
(1234) of the caller.
The Tx indicator lights
and you will hear a
warbling sound for
approximately 10
seconds as the
Radiophone sends your
call.
If the call is received
successfully by the IPC-
500 you will here a
revertive tone, then there
will be a pause while the
number is being dialled.
Once the number has
been dialled by the IPC-
500, you will hear the
appropriate telephone
network service tones.
F
9-21