Codan 8525B Series Handbook page 90

Using the receiver in scan mode
Step Action... Display shows...
4. Press
Scan
5. Press
Scan
Pressing the Scan
button again
returns you to the
display in step 2.
Note: If you select automatic scanning, you now have the option of
selecting Selective Call Mute to be enabled as soon as you
enter the automatic scan mode. If you wish to select this option
then continue with step 6, if not, go to step 7
6. Press The display does not
change.
S'Call
Mute
7. Press No display.
On/Off
6-4
Remarks...
Switches to Auto option.
If this is the option you
want, go to step 7.
Switches from inhib to
ENAbLE.
The indicator will be lit.
You have now selected
selective call mute to be
enabled as soon as you
enter the automatic scan
mode.
Your selection has been
made and the
Radiophone is now
switched off.
q
Outback HF Radiophone