Codan 8525B Series Handbook page 103

Step Action... Display shows...
4. To pause the scan, The display shows the
press any of the channel number and the
fast or slow Tune current frequency.
Rx Frequency
buttons. Example:
1
Fast
5. To resume The display shows the
scanning, press channel number and all
the frequencies as the
Scan
band is scanned
continuously.
6. To stop scanning,
press
Scan
To recommence
7.
normal scanning,
select another
non-band
scanning channel
and press
Scan
Outback HF Radiophone
Using the receiver in scan mode
Remarks...
You may move between
the frequencies by using
any of the Tune Rx
Frequency buttons.
The rate of scan will be
determined by whether
you pressed the fast or
slow button in step 3.
The Scan button
indicator will go out.
Refer to section 4,
Selecting channels.
q
6-17