Returning A Received Call-General - Codan 8525B Series Handbook

Using selective call
Returning a received call—general
This procedure is used when you want to return a call that has been stored in the
memory stack.
Step Action... Display shows...
1. Select the call you
wish to return.
If necessary, tune
The display shows the
the antenna.
channel number and the
identification address of
the caller.
2. Press
Selective
Call
3. Check that the The display shows the
channel is free details of the next
from traffic, then unanswered call.
press
Selective
Call
5-20
Remarks...
Refer to Reviewing the
list of received calls in
memory on page 5-21.
The call details are now
deleted from memory,
but ready to transmit.
The Radiophone sends
the selective call and the
transmit indicator will
light.
If the call is answered,
proceed to use the
Radiophone in the
normal way.
q
Outback HF Radiophone