Selecting The Desired Frequency - Codan 8525B Series Handbook

Selecting the desired frequency

This procedure allows you to select the frequency you desire, and therefore save time.
Once you have selected a frequency you have the option to store the frequency as a P-
channel or exit this facility.
Step Action... Display shows...
1. Press any
Receiver Tuning
button.
2. Press
Enter
3. Enter the
frequency number
using the numeric
buttons.
Press
4.
Enter
If required, you
can fine tune
reception by using
the Receiver
Tuning buttons.
Outback HF Radiophone
Using the Radiophone
Remarks...
The display shows the
last selected channel.
Your next action must
start within 60 seconds,
otherwise you will have
to repeat this procedure.
The decimal point is
automatically inserted by
the transceiver.
The example shows the
display reading if you
typed in 104321.
The Radiophone now
receives this frequency.
Note: after pressing the
Enter button, the
MHz decimal
point disappears
for frequencies
below 10 MHz.
F
4-17