Codan 8525B Series Handbook page 65

Step Action... Display shows...
4. Press
Selective
Call
Repeat this action
until an S appears
in the left hand
position of the
options bar.
5. Press
Enter
6. Use the numeric
buttons to enter
the 'P' channel
number you wish
to use.
7. Press
Enter
If the channel is already
used the display shows
8. If the channel is The display reverts back
already used, you to normal.
can either enter
another number or
press Enter again
to override the
existing one.
Outback HF Radiophone
Using selective call
Remarks...
You will hear a 'pip'.
You will hear a 'pip'.
You will notice that the
display automatically
inserts a 'P' to the
number.
The information will
either be stored under an
existing channel number,
or you will have created
a new one.
q
5-13