Deleting Unwanted Scan Channels - Codan 8525B Series Handbook

Using the receiver in scan mode

Deleting unwanted scan channels

Step Action... Display shows...
1. Ensure your
Radiophone is
switched on.
Select the channel
2.
you wish to
delete.
An example for channel
88.
3. Press
Enter
4. Press this button
twice
O
P
5. Press The display shows the
details of the next lowest
Enter
channel.
Note: The scan program can be locked to prevent changes being made. If
changes are attempted on a locked channel the display shows 'prog inhib'.
If you need to amend this facility, refer to page 6-3 Setting up the scan
mode.
6-18
Remarks...
Refer to section 4,
Selecting channels.
Two '0's entered as a
channel number deletes
the information in the
selected channel.
q
Outback HF Radiophone