Sending A Disconnect Message - Codan 8525B Series Handbook

Making a telephone interconnect call

Sending a disconnect message

When a telephone call is made, a circuit is automatically established between your
outstation Radiophone and the telephone party that the base IPC-500 has dialled.
When you finish a call, this call line must be disconnected. This is achieved by
sending a disconnect message from your Radiophone to the IPC-500.
This procedure assumes that the Radiophone is switched on and still on the original
channel, and the telephone conversation has been completed.
Step Action... Display shows...
1. Press
Selective
Call
Press
2.
Enter
3. Press
Voice
Mute
4. Press
Voice
Mute
9-6
Remarks...
This is an example for
the last called number
1234 on channel 1.
The last telephone
number you called was
08 336 0311.
This deletes the last
number.
You are now ready to
send the disconnect
message.
F
Outback HF Radiophone