Transmitting A Telstra Selective Beacon Call - Codan 8525B Series Handbook

RFDS and Telstra services

Transmitting a Telstra selective beacon call

The beacon facility is used to check signal conditions between your Radiophone and a
selected Telstra station.
Step Action... Display shows...
1. Ensure your The last channel selected.
Radiophone is
switched on.
Select the
2.
required test
channel and tune
the antenna.
3. Press
OTC
S'Call
4. Press
Select
Channel
until the required
selective beacon
address number
appears against
the Telstra station
selected .
10-10
Remarks...
Refer to section 4,
Selecting channels.
When this button is
pressed, the S'Call Mute
is automatically switched
off.
This example allows you
to send a Telstra
selective beacon call to
Brisbane–104.
F
Outback HF Radiophone