Transmitting A Selective Call - Codan 8525B Series Handbook

Using selective call

Transmitting a selective call

For selective call to operate you must have your self-identification number
programmed, refer to Setting the self-identification address on page 5-7.
Step Action... Display shows...
1. Select the
required channel.
Press The display does not
2.
change.
Voice
Mute
to turn the Voice
Mute to the off
position.
3. Check that the The display does not
channel is free change.
from traffic.
If the channel is
busy; wait until
the channel is
free, or try
another channel.
5-14
Remarks...
Ensure the channel is
enabled for selective call.
Press the Display button
to view the enabled
options.
If you need to enable the
channel, refer to
Enabling a channel for
selective call on page
5-12.
The indicator will go out,
and you will hear
background noise.
You will need to listen
for approximately 10
seconds to ensure the
channel is free.
F
Outback HF Radiophone