Danfoss VLT DMS 300 Manual page 95

Table of Contents

Advertisement

Display mode
VAR 1.1 VAR 1.2 VAR 1.3
VAR 2
STATUS
In normal operation, up to 4 different display data
items can optionally be shown continuously: 1,1,
1,2, 1,3 and 2. The present operation status or
alarms and warnings that have been generated are
displayed in line 2 in the form of a number.
In the event of alarms this is displayed in lines
3 and 4 with explanatory text.
A warning will appear flashing in line 2 with
explanatory text in line 1. The active Setup will
also appear on the display.
The arrow indicates the selected direction of rotation.
Here the variable frequency drive shows that it has
an active reverse signal. The body of the arrow
will disappear if a stop command is given, or if the
output frequency drops below 0.1 Hz.
The bottom line displays the frequency transformer's
status. The scrollbar shows which operating values
can be displayed in lines 1 and 2 in Display mode.
Changes are made using the [+ / -] keys.
Switching between AUTO and HAND modes
By activating the [CHANGE DATA] key in [DISPLAY
MODE] the display will indicate the mode of
the variable frequency drive.
Switch mode by using [+/-] key [HAND...AUTO]
In [HAND] mode the reference can be changed
by [+] or [-] keys.
MG.90.F2.22 - VLT is a registered Danfoss trademark
Operating data
Resulting reference
Resulting reference
Feedback
Output frequency
Output frequency x scaling
Motor current
SETUP
Torque
1
Power
Power
Motor voltage
DC link voltage
Thermal load motor
Thermal load
Hours run
Digital input
Pulse input 29
Pulse input 29
Pulse input 33
External reference
Status word
Heatsink temperature
Alarm word
Control word
Warning word
Extended status word
Analog input 53
Analog input 60
Three operating data items can be shown in the
first display line, and one operating variable can be
shown in the second display line. Is programmed via
parameters 009, 010, 011 and 012 Display readout .
Decentral Solutions
Unit
[%]
[unit]
[unit]
[Hz]
[-]
[A]
[%]
[kW]
[HP]
[V]
[V]
[%]
[%]
[hours]
[binary]
[Hz]
[Hz]
[Hz]
[%]
[hex]
[°C]
[hex]
[hex]
[hex]
[hex]
[V]
[mA]
95

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vlt fcd 300

Table of Contents