Danfoss VLT DMS 300 Manual page 167

515-544 Data readout
Value:
Par. Description
no.
515 Res. reference
516 Res. reference [Unit]
517 Feedback [Unit]
518 Frequency
519 Frequency x scale
520 Motor current
521 Torque
522 Power[kW]
523 Power[HP]
524 Motor voltage
525 DC-link voltage
526 Thermal load motor
527 Thermal load inverter
528 Digital input
529 Term.53, analog input
531 Term.60, analog input
532 Term. 33, pulse input
533 External ref.
534 Status word, Hex
537 Inverter temperature
538 Alarm word
539 Control word
540 Warning word
541 Extended status word
544 Pulse count
545 Term. 29, pulse input
Function:
These parameters can be read out via the serial
communication port and the LCP display. See also
parameters 009-012 Display readout.
NOTE
Parameters 515-541 can only be read out
via the serial communication port.
= factory setting. () = display text [] = value for use in communication via serial communication port
MG.90.F2.22 - VLT is a registered Danfoss trademark
Decentral Solutions
Display text
(REFERENCE %)
(REFERENCE [UNIT])
(FEEDBACK [UNIT])
(FREQUENCY)
(FREQUENCY X SCALE)
(MOTOR CURRENT)
(TORQUE)
(POWER (KW))
(POWER (HP))
(MOTOR VOLTAGE)
(DC LINK VOLTAGE)
(MOTOR THERMAL)
(INV. THERMAL)
(DIGITAL INPUT)
(ANALOG INPUT 53)
(ANALOG INPUT 60)
(PULSE INPUT 33)
(EXT. REF.%)
(STATUS WORD)
(INVERTER TEMP.)
(ALARM WORD)
(CONTROL WORD)
(WARN. WORD)
(EXT. STATUS WORD)
(PULSE COUNT)
(PULSE INPUT 29)
Description of choice:
Resulting reference %, parameter 515:
Gives the resulting reference as a percentage in the
range from Minimum reference, Ref
reference, Ref
Resulting reference [unit], parameter 516:
Gives the resulting reference in Hz in Open loop
(parameter 100). In a closed loop the reference unit
is selected in parameter 416 Process units.
Feedback [unit], parameter 517:
Gives the resulting feedback value with the unit/scaling
selected in parameters 414, 415 and 416. See
also dealing with feedback.
Frequency [Hz], parameter 518:
Gives the output frequency from the variable
frequency drive.
Unit
%
Hz, rpm
Par. 416
Hz
Hz
Amp
%
kW
HP
V
V
%
%
Bin
V
mA
Hz
%
Hex
°C
Hex
Hex
Hex
Hex
Hz
to Maximum
MIN
. See also Dealing with references.
MAX
Update
interval
167