Danfoss VLT DMS 300 Manual page 172

678 Configure Control Card
(CONFIG CONTROL CARD)
Value:
Standard version (STANDARD VERSION)
Profibus 3 Mbaud Version
(PROFIBUS 3 MB VER.)
Profibus 12 Mbaud Version
(PROFIBUS 12 MB VER.)
Function:
This parameter enables a configuration of a Profibus
Control Card. The default value depends on the
produced unit, also being the maximum obtainable
value. This means, that a control card only can be
downgraded to a lower performance version.
= factory setting. () = display text [] = value for use in communication via serial communication port
172
Decentral Solutions
[1]
[2]
[3]
MG.90.F2.22 - VLT is a registered Danfoss trademark