Emission Test Results According To Generic Standards And Pds Product Standard; Immunity Test Result According To Generic Standards, Pds Product Standards And Basic Standards - Danfoss VLT DMS 300 Manual

Emission test results according to generic
standards and PDS product standard
The following test results are achieved on a system
consisting of a FCD 300 400 V screened/armoured
VLT FCD 300 with class 1A
RFI-filter
Complies
Complies
Complies
FCD 303-315 30 ft (10 m) shielded/armoured motor cable
FCD 322-335 15 ft (5 m) shielded/armoured motor cable
1
For 30 ft (10 m) cable please contact Danfoss.
Immunity test result according to Generic
standards, PDS product standards and
basic standards
In order to document EMC immunity tests have been
made according to following product standards on a
FCD 300 Product standard/environment
Complies EN 61000-6-2 / Industry
Complies EN 61800-3 / Second environment
Used EMC standards
Emission
EN 50081-2: Generic emission standard part
2: Industrial environment.
IEC/EN 61800-3: Adjustable speed electrical Power
Drive STystems part 3: EMC product standard
including specific test methods.
EN 55011: Industrial, scientific and medical
(ISM) radio-frequency equipment. Limits and
methods of measurement.
CISPR 11: Industrial, scientific and medical
(ISM) radio-frequency equipment. Limits and
methods of measurement.
Immunity
MG.90.F2.22 - VLT is a registered Danfoss trademark
control cable, control box with potentiometer,
screened/armoured motor cable, screened/armoured
brake cable as well as LCP with cable.
Product standard/environment
EN 50081-2/Industry
EN 61800-3/First environment
restricted distribution
EN 61800-3/Second environment
unrestricted distribution
product may cause radio interference in which case the
user may be required to take adequate measures.
system consisting of a FCD 300, a shielded armoured
control cable with control box and potentiometer,
shielded/armoured motor cable, shielded/armoured
brake cable and LCP with cable.
IEC/EN 61000-6-2: Generic immunity standard
part 2: Industrial environment.
IEC/EN 61800-3: Adjustable speed electrical Power
Drive Systems part 3: EMC product standard
including specific test methods.
Basic standards
IEC/EN 61000-4-2: Electrostatic discharge
immunity test.
IEC/EN 61000-4-3: Radiated, radio-frequency,
electromagnetic field immunity test.
IEC/EN 61000-4-4: Electrical fast transient/burst
immunity test.
Simulation of fast switching transients like relay contact
bounce, interruption of inductive loads, etc.
Decentral Solutions
Basic standard
EN55011 group 1 class A
CISPR 11 group 1 class A
CISPR 11 group 2 class A
1
NOTE
FCD 300 with class 1A RFI-filter is a product of
the restricted sales distribution class according
to IEC 61800-3. In a domestic environment this
Test results
See Basic standards test results.
See Basic standards test results.
185