Installation Environment And Mounting Space - Panasonic MICRO-IMAGECHECKER A200 Series Hardware Manual

Installation and Wiring
2.2

Installation Environment and Mounting Space

2.2

Installation Environment and Mounting Space

Avoid Installing the Equipment in Locations with the Following Characteristics
− Where the temperature is outside the range of 0°C to 50°C.
− Where the relative humidity is outside the range of 35%RH to 75%RH.
− Where there is a danger of condensation due to sudden temperature fluctuations.
− In the presence of corrosive gas or combustible gas.
− Where dust, metal powders, or salt are present in large amounts.
− In an environment where there is a possibility that organic solvents such as benzene,
paint thinner, or alcohol, or strong alkaline substances such as ammonia or caustic
soda may adhere.
− Where the equipment will be subject to vibration or shock.
− In direct sunlight.
− Where there is a possibility that water, oil, or chemicals may come into direct contact.
− Where there will be a weight load placed on the main unit.
Noise Considerations
− Install the unit as far away as possible from high−voltage lines and equipment, drive
lines and equipment, and other equipment that may generate large power surges
when it turns on or off.
− Install the unit as far away as possible from equipment such as amateur radio
transmitters.
2 − 4
A200/A100 Hardware