Table of Contents
Advertisement
Maintenance
8. Replacing the Housing Cover Line up the screw hole of the back plane
divider with the main housing (using the small dowel works best) and
attach the housing cover. Place the cover housing onto the main housing
and fasten the three screws.
Use dowel to line
up screw hole
9. Test Pipette Test the pipette for smooth operation (repeat steps 4-9 as
necessary).
10. Replace Color Ring Re-attach the color ring. The pipette is now ready
for use.
42
Figure F.1.4h: Replacing the Housing Cover
Housing Cover
Advertisement
Table of Contents
