Table of Contents
Advertisement
Maintenance
Optional
Dowel
Note: Use a dowel to line up the screw hole of the main housing with the back
plane divider. This will help with reassembly of the main housing and housing cover.
6. Inserting Ejector Trigger Place the end of the ejector spring against the
plastic stop and compress the spring while positioning the ejector trigger
onto the ejector trigger rail.
NOTE: Be careful not to pinch the cross tubes when inserting the ejector trigger.
40
Back Plane
Divider
Figure F.1.4e: Installing Manifold Assembly
Manifold
Assembly
Advertisement
Table of Contents
