Removing The Wireless Card; Prerequisites; Procedure - Alienware Area-51 Threadripper Edition R7 Service Manual

Removing the wireless card

WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in After working inside your
www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the stability
2 Remove the left and right side-panels. See
3 If you have multiple graphics cards installed, remove the graphics card. See

Procedure

1 Lay the chassis on the right side.
2 Locate the wireless card on the system board.
3 Remove the screw (M2x3) that secures the wireless card to the chassis.
4 Slide and remove the wireless card from the wireless-card slot.
5 Disconnect the antenna cables from the wireless card.
66
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
foot.
"Removing the side
computer. After working inside your computer, follow the instructions
panels".
"Removing multiple graphics cards".